Crystal Vision
Card edge operation
TANDEM 3G User Manual R1.4
19
23/04/2012
Status menus
From the STATUS top menu press ENTER then SCROLL/ADJ to access the five status sub
menu options. These options are; General Status, Input Groups present, Output Groups
present, Embedded Input channel silence and AES input silence. To enter a sub menu once
selected press ENTER and use the SCROLL/ADJ/ADJ control to traverse the sub menu.
Menu
Comment
General Status
Press ENTER and rotate SCROLL/ADJ.
Input present
The Input video standard is shown.
Ip 1080p50/59/60, Ip 1080p50/59/60, Ip720p50/59/60, Ip 525, Ip 625,
IP Missing, IP Not Sup.
GPO 6 status
GPO 6 Status.
On, Off.
VANC blanking
Vertical ancillary data blanking.
On, Off.
Board software
The version number of the currently installed software.
Serial number
The electronically stored PCB serial number.
IP address
Tandem 3G IP address. Note, the Ethernet connection is available on-
board and is only used when updating the board software
Input Groups
Press ENTER and rotate SCROLL/ADJ.
Audio Group 1
Input Video Embedded Audio Group 1 status
Group 1 Present, Group 1 Missing.
Audio Group 2
Input Video Embedded Audio Group 2 status
Group 2 Present, Group 2 Missing.
Audio Group 3
Input Video Embedded Audio Group 3 status
Group 3 Present, Group 3 Missing.
Audio Group 4
Input Video Embedded Audio Group 4 status
Group 4 Present, Group 4 Missing.
Output Groups
Press ENTER and rotate SCROLL/ADJ.
Audio Group 1
Output Video Embedded Audio Group 1 status
Group 1 Present, Group 1 Missing.
Audio Group 2
Output Video Embedded Audio Group 2 status
Group 1 Present, Group 2 Missing.
Audio Group 3
Output Video Embedded Audio Group 3 status
Group 1 Present, Group 3 Missing.
Audio Group 4
Output Video Embedded Audio Group 4 status
Group 1 Present, Group 4 Missing.
