Crystal Vision
Using the front control panel
TANDEM 3G User Manual R1.4
34
23/04/2012
AES Setup
Preset Control
GPO Control
When a sub menu has been selected, further options may be obtained by using the Shaft
control to SCROLL/ADJ through them. Once the desired option has been located a selection
or value change can be made by either toggling the appropriate function key or by selecting
and using the shaft control to alter a numerical value. A configuration change or value will be
activated as the shaft control is rotated or function button is toggled. The following chart
shows the available TANDEM 3G menus. The actual menus available may vary slightly as
software is updated.
Active control panel menus
