Crystal Vision
Statesman
TANDEM 3G User Manual R1.4
47
23/04/2012
5 Statesman
5.1 Statesman introduction
The Crystal Vision Statesman PC control software is designed to control a range of Crystal
Vision modules via serial control from a PC. Statesman provides a user friendly means of
configuring and operating Crystal Vision modules with the benefit of “see-at-a-glance” status
monitoring.
The main Statesman application communicates with each module in a frame through a
Statesman capable or active control panel. An active panel or REMIND remote control panel
must be fitted to allow Statesman control.
5.2 Statesman operation
The initial view will show an Explorer style view of the connected frames and modules.
Double clicking on a module will enable the display of the main application menus.
Statesman main application window
The two large control panes shown in the upper and lower halves of the window may display
different menus for the same card, or controls for different cards. Click on the horizontal
button-bar between the two panes to close the lower pane or drag the button to vary the size of
the panes.
Note:
For further details of Statesman configuration and operation please refer to the Statesman manual.
