Crystal Vision
Maintenance
PSU-160i – front view (Note 2U frame shown but same PSU
as 1U)
The error LED will light up continuously if power rail levels are outside operational limits.
When the fan speed signal is present and power rails are normal, the error LED is unlit.
The Indigo 1-DP range has two PS-80i modules side by side
Either PS-80i module can be removed independently without loss of frame power.
Removing a PSU
To remove a PSU proceed as follows:
•
Apply sideways pressure on the PSU handle towards the right and remove the PSU by
pulling it forward
•
Take care not to damage the panel ribbon cable
Caution:
There are no user serviceable parts inside the power supply module covers. The
safety covers should not be removed even when the module is disconnected.
Indigo 1 User Manual R1.14
65
27 February 2020
