Crystal Vision
Virtual Cards
Transfer the file to the frame
Once you have got the controls you want you need to transfer the xml file to the
/virtualcard
directory in the frame. Follow the instructions in section
Then reboot the frame. The virtual card will then be available in its new virtual slot to be
accessed by VisionWeb, VisionPanel or by the Indigo 2AE active front panels:
Screen grab showing new virtual card ‘TestCard’ in slot 18 (2.02) in addition to the existing
MultiLogo and SYNNER 310 cards in slots 4 and 6
Clicking on ‘2.02 TestCard’ will open up the new virtual card:
For the simple example above, the new controls were each added to the two second level
<controlgroup> entries for ‘MultiLogo’ and ‘Synner 310’, which were both included in the first
level <controlgroup> ‘Control’. The controls could have been combined into one group or
allocated separate tabs by correct nesting of the XML control definitions within the hierarchy.
Indigo 1 User Manual R1.14
53
27 February 2020
