Crystal Vision
Installing modules
3 Installing modules
The 1U Indigo frames have six slots for Crystal Vision video or audio cards. Signal
connections are made through rear modules.
The inside of the frame can be accessed to change the modules by pulling forward the two
black knobs, one on each side of the front panel.
The Indigo 1AE Crystal Vision frame with front control panel open
Warning:
Although the frame can be operated with the front panel open, the frame may
not meet electromagnetic compatibility (EMC) requirements in this condition.
3.1 Installing modules
Module positions
Module positions are numbered one to six as shown below:
The Indigo 1 frame showing slot numbers
Before fitting or removing signal modules, one or more retaining brackets may need to be
removed. Retaining brackets prevent the modules from being inadvertently disconnected or
from coming out during transit. They may also prove useful in OB vehicles when travelling
over rough ground.
Note:
The PSU module fits into the PSU slot on the right, which has the reserved location
or slot number of 14 to avoid conflict with module slot numbers in both 1U and 2U
frames.
Indigo 1 User Manual R1.14
17
27 February 2020
