Cryomech LNP-40, Инструкция по установке, эксплуатации и текущему обслуживанию

Страница: 26 / 102

Inspection and Unpacking
4-1
4 Section 4: Inspection and Unpacking
4.1 Inspection of crates
IMPORTANT
IF THERE IS ANY VISIBLE DAMAGE, DO NOT OPEN OR UNPACK THE PACKING
CRATES BEFORE YOU CONTACT CRYOMECH.
Be sure to note on the shipping documents any visible damage to the crate, including tip
indicators that have been activated.
4.2 Unpacking
The system is packaged in secure packing crates. The base of each packing crate is a
wooden pallet, to which the system is strapped. Some crates are all wood and others are
wood and cardboard. The walls of the wood crates are placed around the system and
attached to the pallet and each other with tension clips (Klimp® fasteners). After adding
packing material as needed, the top is clipped onto the packing crate.
The outer walls and the top of cardboard crates are attached to the wooden pallet with
steel banding.
4.2.1 Directions for unpacking:
1) Remove the top of the packing crate by either unfastening the Klimp® fasteners that
fasten the top to the sides or cutting the steel banding.
2) Check for tip indicators on the inside of the packing crate and notify Cryomech if
interior tip indicators have been activated even though tip indicators on the outside
were not.
3) Check for any visible signs of damage besides activated tip indicators.
4) Locate and remove the manual, and all other items that can easily be lifted out of the
crate. The manual is packed in an envelope with the shipping documents.
5) Wooden crates: Remove the sides of the packing crate by unfastening the Klimp®
fasteners that fasten the sides to the pallet.
Cardboard crates: Lift the cardboard outer shell straight up and off.
6) Remove packing material and any straps that anchor items to the pallet.
7) Make sure that a place is prepared for the equipment to sit (see directions in Section
6 for installation).
8) If possible, retain the packing materials and the packing crates to use in the future if
you need to ship the equipment to Cryomech.
4.2.2 Specific directions for moving when unpacking
1) The helium compressor package needs to be lifted off the pallet base and onto the
floor with a fork truck or a hoist. The weight of the helium compressor package is