10
11
Example:
It’s 4pm and you want to have a soup cooked and ready in 2 hours’ time for dinner at 6pm. You want to set the machine
now so you are free to do other things.
The pre-set function (if unchanged) will cook for 30 minutes at HIGH pressure. Time to gain pressure varies according to
humidity and water temperature, but let’s assume it takes 15 minutes to gain pressure. Therefore total time is 45 minutes.
To have the stew ready by 6pm, you will need to delay the start of your cooking by approximately 1 hour and 15 minutes.
1. Press SOUP
2. The Display Screen will flash “0:30”
3. Press the DELAY button and set for “1:15”
4. Press START/STOP
COOKING POT MARKINGS
Inside the removable Cooking Pot are markings to guide the fill level of the Cooking Pot. The word MAX indicates the
maximum fill line.
The 1/3, 1/2, and 2/3 markings are handy guides to use in your recipes.
CAUTION:
Never load the Cooking Pot above the maximum ingredient level line marked MAX
on the inside of the Cooking Pot.
Foods that expand during cooking (e.g. rice) should never go above the 1/2 mark.
Note:
The Multi-Cooker cannot pressure cook without liquid. Ensure a minimum of 250ml of
liquid is used inside the removable Cooking Pot.
PRESSURE COOKING
Pressure cooking is an ideal way to create quick, flavorful meals. Pressure cooking is a method of cooking food in liquid
(water, stock, wine, etc.) in a sealed Cooking Pot. The sealed Multi-Cooker retains steam and builds pressure, raising the
temperature of the liquid inside the pot above boiling point. The increased temperature of the liquid and the steam results in
reduced cooking times.
HIGH Pressure Setting is 6.5 - 10 PSI (45 - 70 kPa). It is suitable for a wide range of foods.
LOW Pressure Setting is 3.3 - 6.5 PSI (23 - 45 kPa). It is more suited to delicate foods like chicken fillet, fish and some
vegetables.
TURBO Pressure Setting is 13- 15 PSI (90 -103 kPA). It is suitable for a wide range of foods.
KEEP WARM Setting: When cooking time is completed, the Multi-Cooker automatically switches to the KEEP WARM setting
to prevent overcooking and to keep your cooked food warm until serving - perfect for busy families, those on the run and
those who need flexible meal times. This setting is not hot enough to cook and should only be used to keep warm, cooked
food for serving.
Ideal Meals to Pressure Cook: Soups, stocks, casseroles, sauces (e.g. pasta sauces), meat, rice, firm vegetables (beetroot,
potatoes) and desserts (e.g., pudding).
Capacity: Never fill the Cooking Pot above the MAX line. Foods that expand during cooking should never go above the
1/2 mark. The Multi-Cooker cannot pressure cook without liquid. Ensure a minimum of 250ml of liquid is used inside the
removable Cooking Pot.
MANUAL FUNCTION
This function allows the user to select their own pressure cooking time ranging from 1 minute to 4 hours, with a temperature
selection of Low or High and the option to use TURBO PRESSURE. This is particularly suitable for those users who would
like to pressure cook food items not covered by our other cooking functions. This also gives the user greater scope for
sourcing recipes from a wide range of sources. Please follow our guidelines for Pressure Cooking on page 11.
USING THE PRESSURE COOKING FUNCTIONS
Place the Multi-Cooker on a flat, level surface.
Place Cooking Pot inside Heating Base. Plug the Multi-Cooker into a wall outlet. The Multi-Cooker will beep, and the
Display Screen will illuminate with four dashes (- - - -).
1. Place your food and liquid inside the removable Cooking Pot.
2. Place the Lid onto the Multi-Cooker and align with . To lock, rotate counterclockwise to the LOCKED position.
3. Rotate the Steam Release Dial to the “Seal” position.
4. Select the desired cooking function.
5. Adjust the cooking time and pressure if necessary.
NOTE:
See the Cooking Guide on page 219 to find the possible time and pressure adjustments
6. Once you have made the desired adjustments, if any, press START/STOP.
7. The Multi-Cooker needs to gain pressure before pressure cooking can begin. When the Multi-Cooker is gaining
pressure, “HEAt” will appear on the Display Screen and the time will not count down. The amount of time the Multi-
Cooker takes to gain pressure varies according to humidity and water temperature, but average pressurization time
is 5-30 minutes. When pressure has been reached, “HEAt” will disappear on the Display Screen, all 5 lights on the
status bar will be illuminated and the time will begin to count down.
8. After the set cooking time has elapsed, the Multi-Cooker will beep and will automatically switch to the KEEP WARM
setting. The Display Screen will therefore change from the cook time to a new timer that will count up to 4:00 (4 hours)
or until you press the START/STOP button. After 4 hours in the KEEP WARM setting, the Multi-Cooker will go into
stand-by mode, and the Display Screen will illuminate with four dashes (----).
Note:
Always ensure that food is fully cooked before consuming.
TIP:
1. The pressure cooking settings are in the Cooking Guide table on page 219.
2. If the lid is not shut correctly or if the Steam Release Dial is not in the “Seal” position, the Multi-Cooker cannot gain
pressure and an ERROR message will appear in the Display Screen. Ensure that the Sealing Gasket is placed evenly in
the lid. See the ERROR CODES chart on page 20.
3. It is common for some steam to release through the Bobber Valve during the cooking cycle. This is part of normal
operation of the unit.
NOTE:
The Multi-Cooker cannot pressure cook without liquid. Ensure a minimum of 250ml of liquid is used inside the
removable Cooking Pot.
CAUTION:
During cooking, steam will build up in the Multi-Cooker, so when lifting the lid use an oven glove to protect your
hands.
USING THE TURBO PRESSURE FUNCTION
The TURBO PRESSURE function will reduce the selected cooking time by 40%. The TURBO PRESSURE function can be
used with the STEAM, RICE/GRAINS, BEANS/CHILI, MEAT/POULTRY, SOUP/STEW and MANUAL settings.
1. Select your desired cooking function and adjust the time and pressure as required.
2. Press the TURBO PRESSURE button. The time on the display screen will reduce by 40% and ‘turbo’ will be displayed
on screen. If needed, the cooking time can be adjusted further to suit your preferences.
3. Press START/STOP to begin cooking.
4. Once cooking the time is complete the Multi-Cooker will beep and automatically switch to the KEEP WARM setting.
Always ensure that food is fully cooked before consuming.
NOTE:
The TURBO PRESSURE function cannot be used with non-pressurised (traditional) settings or when the Multi-
Cooker is set to low pressure.
*vs when cooking in the Crockpot CSC062X using the high pressure setting.
2
3
2
1
1
3
MAX
CSC062X_21MLM2 (EU).indd 10-11
CSC062X_21MLM2 (EU).indd 10-11
6/15/21 16:44
6/15/21 16:44
