Crestron UC-PHONE-T Скачать руководство пользователя страница 2

Страница: 2 / 62

Crestron product development software is licensed to Crestron dealers and Crestron Service Providers (CSPs) under a

limited non-exclusive, non-transferable Software Development Tools License Agreement. Crestron product operating system

software is licensed to Crestron dealers, CSPs, and end-users under a separate End-User License Agreement. Both of these

Agreements can be found on the Crestron website at

www.crestron.com/legal/software_license_agreement

The product warranty can be found at

www.crestron.com/legal/sales-terms-conditions-warranties

The specific patents that cover Crestron products are listed at

www.crestron.com/legal/patents

Certain Crestron products contain open source software. For specific information, visit

www.crestron.com/legal/open-

source-software

Crestron, the Crestron logo, and Crestron XiO Cloud are either trademarks or registered trademarks of Crestron Electronics,

Inc. in the United States and/or other countries. Microsoft Teams is either a trademark or registered trademark of Microsoft

Corporation in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be

used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any

proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography.

This document was written by the Technical Publications department at Crestron.

Содержание UC-PHONE-T































































Результаты поиска

Содержание UC-PHONE-T

Отзывы:

Похожие инструкции для UC-PHONE-T

Бренды по названию

Популярные бренды

Crestron UC-PHONE-T, Дополнительное руководство

Результаты поиска

Содержание UC-PHONE-T

Отзывы:

Похожие инструкции для UC-PHONE-T

Бренды по названию

Популярные бренды