12
•
UC-PHONE-T & UC-PHONE-T-PLUS
Supplemental Guide – DOC. 8413A
Available Authentication Methods
•
EAP None: When selected, authentication protocols are not used.
•
EAP-MD5: When selected, MD5 authentication is used. MD5 is the base security
requirement in the EAP standard and uses the username and password as the
authentication credentials. Enter the identity and password in the Identity and
MD5 Password fields.
•
EAP-TLS: When selected, TLS authentication is used. Enter the identity and
password in the Identity and MD5 Password fields. Other parameters are
managed from the web interface. For details, refer to “802.1x” on page 23.
•
EAP-PEAP/MSCHAPv2: When selected, PEAP/MSCHAPv2 authentication is
used. Enter the identity and password in the Identity and MD5 Password fields.
Other parameters are managed from the web interface. For details, refer to
•
EAP-TTLS/EAP-MSCHAPv2: When selected, TTLS/EAP-MSCHAPv2
authentication is used. Enter the identity and password in the Identity and MD5
Password fields. Other parameters are managed from the web interface. For
details, refer to “802.1x” on page 23.
•
EAP-PEAP/GTC: When selected, PEAP/GTC authentication is used. Enter the
identity and password in the Identity and MD5 Password fields. Other
parameters are managed from the web interface. For details, refer to “802.1x”
on page 23.
•
EAP-TTLS/EAP-GTC: When selected, TTLS/GTC authentication is used. Enter
the identity and password in the Identity and MD5 Password fields. Other
parameters are managed from the web interface. For details, refer to “802.1x”
on page 23.
•
EAP-FAST: When selected, FAST authentication is used. Enter the identity and
password in the Identity and MD5 Password fields. Other parameters are
managed from the web interface. For details, refer to “802.1x” on page 23.
LLDP
The LLDP section enables or disables the Link Layer Discovery Protocol (LLDP) feature
on the phone and configures the interval (in seconds) for the Phone to send the LLDP
request. To configure LLDP:
1.
Move the LLDP Status switch to the right to enable LLDP. When the switch is
moved to the left, LLDP is disabled.
2.
Enter the interval (in seconds) for the phone to send the LLDP request in the
Packet Interval field.
Содержание UC-PHONE-T
Страница 4: ...ii Contents Supplemental Guide DOC 8413A Meetings Screen 53 Voicemail 55 Microsoft Teams Rollout 56 ...
Страница 25: ...Supplemental Guide DOC 8413A UC PHONE T UC PHONE T PLUS 21 Network Advanced ...
Страница 61: ...Supplemental Guide DOC 8413A UC PHONE T UC PHONE T PLUS 57 This page is intentionally left blank ...