Crestron UC-PHONE-T Скачать руководство пользователя страница 26

Страница: 26 / 62

•

UC-PHONE-T & UC-PHONE-T-PLUS

Supplemental Guide – DOC. 8413A

LLDP

The LLDP section enables or disables the Link Layer Discovery Protocol (LLDP) feature

on the phone and configures the interval (in seconds) for the Phone to send the LLDP

request. To configure LLDP:

Move the Active switch to ON enable LLDP. When the switch is moved to OFF,

LLDP is disabled.

Enter the interval (in seconds) for the phone to send the LLDP request in the

Packet Interval field.

CDP

The CDP section enables or disables the Cisco Discovery Protocol (CDP) feature on the

phone and configures the interval (in seconds) for the Phone to send the CDP request.

To configure CDP:

Move the Active switch to ON to enable CDP. When the switch is moved to Move

the Active switch to ON, CDP is disabled.

Enter the interval (in seconds) for the phone to send the CDP request in the

Packet Interval field.

VLAN

The VLAN section configures the phone’s Internet and PC ports as part of a VLAN.

•

WAN Port: Move the Active switch to ON to connect the Internet port and

configure the port for operation. When the switch is set to OFF, the Internet port

is no longer connected to the VLAN.

Once the Internet port is assigned to the VLAN, enter a value for VID (1-4094)

and select a priority level (0-7) from the Priority drop-down list.

•

PC Port: Move the PC Port switch to ON to connect the PC port and configure

the port for operation. When the switch is set to OFF, the PC port is no longer

connected to the VLAN.

Once the PC port is assigned to the VLAN, enter a value for VID (1-4094) and

select a priority level (0-7) from the Priority drop-down list.

•

DHCP VLAN: Move the Active switch to ON to enable and configure the DHCP

VLAN discovery feature. When the switch is set to OFF, the DHCP VLAN

discovery feature is disabled.

Once the PC port is assigned to the VLAN, enter values for VID (1-4094) and

Option (1-255).

Port Link

The Port Link section configures the transmission method of the Internet and PC ports.

•

Select the transmission method of the Internet port from the WAN Port Link

drop-down list.

Содержание UC-PHONE-T































































Результаты поиска

Содержание UC-PHONE-T

Отзывы:

Похожие инструкции для UC-PHONE-T

Бренды по названию

Популярные бренды

Crestron UC-PHONE-T, Дополнительное руководство

Результаты поиска

Содержание UC-PHONE-T

Отзывы:

Похожие инструкции для UC-PHONE-T

Бренды по названию

Популярные бренды