Crestron UC-PHONE-T Скачать руководство пользователя страница 11

Страница: 11 / 62

Supplemental Guide – DOC. 8413A

UC-PHONE-T & UC-PHONE-T-PLUS

•

Bluetooth®

The phone can connect with a compatible Bluetooth headset for wireless operation. Tap

Bluetooth to configure the phone’s Bluetooth feature. Settings are displayed on the

right side of the screen.

Bluetooth

To enable and configure the Bluetooth feature, move the Bluetooth switch to the right.

To disable the Bluetooth feature, move the Bluetooth switch to the left.

When enabled, a list of available Bluetooth devices that are in pairing mode are

displayed under AVAILABLE DEVICES. Tap the device that is to be connected.

NOTE:

To avoid conflicts, only one phone and one Bluetooth device should be in pairing

mode at a time.

Once Bluetooth is enabled, the phone’s device name can be set and the phone can be

configured to be discoverable by other devices.

•

Device Name: To change the device name, tap the device name and enter a new

device name. Tap Done when finished.

•

Open Discover: To allow the phone to be discovered by Bluetooth devices, move

the Open Discover switch to the right.

Содержание UC-PHONE-T































































Результаты поиска

Содержание UC-PHONE-T

Отзывы:

Похожие инструкции для UC-PHONE-T

Бренды по названию

Популярные бренды

Crestron UC-PHONE-T, Дополнительное руководство

Результаты поиска

Содержание UC-PHONE-T

Отзывы:

Похожие инструкции для UC-PHONE-T

Бренды по названию

Популярные бренды