Crestron UC-PHONE-T Скачать руководство пользователя страница 15

Страница: 15 / 62

Supplemental Guide – DOC. 8413A

UC-PHONE-T & UC-PHONE-T-PLUS

•

PC Port: Move the PC Port switch to the right to connect the PC port and

configure the port for operation. When the switch is moved to the left, the PC

port is no longer connected to the VLAN.

Once the PC port is assigned to the VLAN, enter values for VID (1-4094) and

Priority (0-7).

•

DHCP VLAN: Move the DHCP VLAN switch to the right to enable and configure

the DHCP VLAN discovery feature. When the switch is moved to the left, the

DHCP VLAN discovery feature is disabled.

Once the PC port is assigned to the VLAN, enter values for VID (1-4094) and

Option (1-255).

Web Server

The Web Server section enables and configures the web access types to be used (HTTP

and HTTPS) by the phone.

•

HTTP Status: Move the HTTP Status switch to the right to enable HTTP

addressing. When the switch is moved to the left, HTTP addressing is no longer

available.

Once the HTTP is enabled, enter the port number (1 through 65535) that should

be used for HTTP communication in the HTTP Port field.

•

HTTPS Status: Move the HTTPS Status switch to the right to enable HTTPS

addressing. When the switch is moved to the left, HTTPS addressing is no longer

available.

Once HTTPS is enabled, enter the port number (1 through 65535) that should be

used for HTTPS communication in the HTTPS Port field.

802.1x Mode

The 802.1x section enables and configures the phone to use 802.1x. authentication.

Select an Authentication Method

To select a method of authentication:

•

Tap the name of the authentication method to display a list of available

authentication methods.

•

Touch and drag up or down to scroll through the list of available methods. Refer

to “Available Authentication Methods” below for details.

•

Tap the method name to select, and then tap OK. The phone will prompt to

reboot.

•

Click OK to reboot the phone, or click CANCEL to continue configuration without

rebooting.

Содержание UC-PHONE-T































































Результаты поиска

Содержание UC-PHONE-T

Отзывы:

Похожие инструкции для UC-PHONE-T

Бренды по названию

Популярные бренды

Crestron UC-PHONE-T, Дополнительное руководство

Результаты поиска

Содержание UC-PHONE-T

Отзывы:

Похожие инструкции для UC-PHONE-T

Бренды по названию

Популярные бренды