20
•
UC-PHONE-T & UC-PHONE-T-PLUS
Supplemental Guide – DOC. 8413A
2.
Depending on the mode chosen, configure the IPv4, IPv6, or IPV4 and IPv6
parameters.
−
Configuration Type: Select DHCP to obtain the IP address, subnet mask,
default gateway, and DNS server from a DHCP server. Otherwise, select
Static IP to manually enter values.
−
Static DNS: Set to ON to specify static addresses for the primary and
secondary DNS servers when DHCP is enabled. Otherwise, set to OFF to
obtain DNS server addresses from the DHCP server.
3.
Click Confirm to save settings or Cancel to cancel.
PC Port
The PC port on the back of the Phone can be used to connect a PC for a connection to
the LAN. You can enable or disable the port.
Network – PC Port
1.
Click PC Port to configure the PC port.
2.
Select the mode of operation from the PC Port Mode drop-down list.
−
Select Auto Negotiation from the drop-down list to provide a LAN
connection to a PC connected to the PC port.
−
Select Disabled from the drop-down list to disable the PC port.
3.
Click Confirm to save settings or Cancel to cancel.
Advanced
The Advanced section configures the Link Layer Discovery Protocol (LLDP), the Cisco
Discover Protocol (CDP), the VLAN, port transmission methods, web server functionality,
802.1x authentication, data packet spanning, and Stateless Address Autoconfiguration
(SLAAC). Click Advanced to configure these parameters. The Advanced section is
displayed.
When all settings are made, click Confirm to save settings or Cancel to cancel.
Содержание UC-PHONE-T
Страница 4: ...ii Contents Supplemental Guide DOC 8413A Meetings Screen 53 Voicemail 55 Microsoft Teams Rollout 56 ...
Страница 25: ...Supplemental Guide DOC 8413A UC PHONE T UC PHONE T PLUS 21 Network Advanced ...
Страница 61: ...Supplemental Guide DOC 8413A UC PHONE T UC PHONE T PLUS 57 This page is intentionally left blank ...