Crestron UC-PHONE-T Скачать руководство пользователя страница 38

Страница: 38 / 62

•

UC-PHONE-T & UC-PHONE-T-PLUS

Supplemental Guide – DOC. 8413A

−

6: informational

•

Max Log File Size (2048-20480KB): Specify the maximum size (in KB) of the log

files (MAC-boot.log and MAC-sys.log) to be stored on the phone.

•

Export Local Log: Click Export to export the local log files sys.log or boot.log.

Syslog

The Syslog section configures the phone to upload log messages to the syslog server in

real time.

•

Enable Syslog: To enable the uploading of log messages to the syslog server, set

Enable Syslog to ON. To turn off logging, set Enable Syslog to OFF.

•

Syslog Server: Enter the IP address of the syslog server and port number to use

in the Syslog Server and Port fields.

•

Syslog Transport Type: Select the transport protocol that the phone uses when

exporting log messages to the syslog server from the drop-down list.

•

Syslog Level: Sets the detail level of syslog information that displays in the

syslog. Select a detail level from the drop-down list.

−

0: system is unusable

−

1: action must be taken immediately

−

2: critical condition

−

3: error conditions

−

4: warning conditions

−

5: normal but significant condition

−

6: informational

•

Syslog Facility: Sets the facility that generates the log messages. Select a facility

from the Syslog Facility drop-down list.

•

Syslog Prepend Mac: Set to ON to prepend the phone’s MAC address to log

messages that are exported to the syslog server. Set to OFF to export log

messages to the syslog server without the phone’s MAC address.

•

Export All Diagnostic Files: Use these controls to start and stop the diagnostics

process and export the results.

−

Click Start to begin capturing signal traffic in the Pcap trace, boot.log,

sys.log, and .bin configuration files. The system log level will be automatically

set to 6. The file format of the exported diagnostic file is *.tar.

−

Click Stop to stop capturing signal traffic.

−

Click Export to open the file download window, and then save the diagnostic

file to the local PC. A diagnostic file named allconfig.tgz will be exported to

the local PC.

Содержание UC-PHONE-T































































Результаты поиска

Содержание UC-PHONE-T

Отзывы:

Похожие инструкции для UC-PHONE-T

Бренды по названию

Популярные бренды

Crestron UC-PHONE-T, Дополнительное руководство

Результаты поиска

Содержание UC-PHONE-T

Отзывы:

Похожие инструкции для UC-PHONE-T

Бренды по названию

Популярные бренды