Crestron UC-PHONE-T Скачать руководство пользователя страница 14

Страница: 14 / 62

•

UC-PHONE-T & UC-PHONE-T-PLUS

Supplemental Guide – DOC. 8413A

Network

WAN Port

The WAN Port section determines the IP address format to use (IPv4, IPv6, or IPv4 and

IPv6), the methods for obtaining an IP address (DHCP or Static), and the static IP

address of the DNS servers.

•

IP Mode: Touch and drag up or down to specify the IP addressing mode to use

(IPv4, IPv6, or IPv4 and IPv6). Tap OK when done or tap CANCEL to cancel.

•

IPv4 Type: Touch and tap the the method used for obtaining an IPv4 address

(DHCP or Static). Tap OK when done or tap CANCEL to cancel.

•

IPv4 Static DNS: Move the IPv4 Static DNS switch to the right to enter static

IPv4 addresses for the primary and secondary DNS servers. When the switch is

moved to the left, DHCP will be used to obtain addresses for the DSN servers.

•

IPv6 Type: Touch and tap the the method used for obtaining an IPv6 address

(DHCP or Static). Tap OK when done or tap CANCEL to cancel.

•

IPv6 Static DNS: Move the IPv6 Static DNS switch to the right to enter static

IPv6 addresses for the primary and secondary DNS servers. When the switch is

moved to the left, DHCP will be used to obtain addresses for the DSN servers.

VLAN

The VLAN section configures the phone’s Internet and PC ports as part of a VLAN.

•

WAN Port: Move the WAN Port switch to the right to connect the Internet port

and configure the port for operation. When the switch is moved to the left, the

Internet port is no longer connected to the VLAN.

Once the Internet port is assigned to the VLAN, enter values for VID (1-4094) and

Priority (1-7).

Содержание UC-PHONE-T































































Результаты поиска

Содержание UC-PHONE-T

Отзывы:

Похожие инструкции для UC-PHONE-T

Бренды по названию

Популярные бренды

Crestron UC-PHONE-T, Дополнительное руководство

Результаты поиска

Содержание UC-PHONE-T

Отзывы:

Похожие инструкции для UC-PHONE-T

Бренды по названию

Популярные бренды