Crest Electronics CDVS-4100 Series Скачать руководство пользователя страница 64

Страница: 64 / 67

8-7

Controlling the Playback Functions with the Front Panel

The front panel can be used to control the playback functions. The following images describe the panel but-

tons and their functions.

1 - Menu button - When in playback mode will bring up playback pop up menu.

2 - Search button - When in live view will bring up main search menu.

3 - Reverse button - When pushed will reverse playback video at normal speed.

4 - Forward play - When pushed will play video forward at normal speed.

5 - Pause button - When pushed will cause the playback to stop.

6 - Jog Shuttle Control - When turned to the left will reverse play video at fast speed, when turned to

the right will forward play video at fast speed. The more the user turns the control to the left or

right the faster the video playback will be. Options are 1x, 2x, 4x, 16x, 32x, 64x, 128x, 256x.

Playback Pop Up Menu

The playback pop up menu allows the user to move to the Search window, Live window, Backup window, or

turn Digital PTZ On and Oﬀ. Please see section on using Digital PTZ. The image below shows the Playback

popup menu.

Содержание CDVS-4100 Series




































































Результаты поиска

Содержание CDVS-4100 Series

Отзывы:

Crest Electronics CDVS-4100 Series, Руководство по установке и эксплуатации, Страница: 64 / 67

Результаты поиска

Содержание CDVS-4100 Series

Отзывы: