Crest Electronics CDVS-4100 Series Скачать руководство пользователя страница 55

Страница: 55 / 67

7-22

TCP/IP Information

When using a Static IP, you need to provide the DVR with the IP address, subnet mask, Gateway, and DNS

number. These must be obtained from your network administrator or your internet service provider. If you

are using DHCP or xDSL connection, this information will be obtained automatically by the system. The im-

age below shows the TCP/IP information.

IP address

Subnet Mask
Default Gateway

DNS number

Mac Address

Network (E-Mail Notiﬁcation)

The system has the ability to send e-mail notiﬁcation upon a sensor, or video loss event. This menu is the

setup window for setting up the sender and receiver E-Mail account information. The image below shows

the Network (E-Mail Notiﬁcation) menu.

Enable E-Mail

Notiﬁcation

Receiver

Sender

To set up the e-mail notiﬁcation, enter your POP Server name in the sender box. Enter the person’s e-mail

address that you want to receive the e-mail notiﬁcation in the receiver box.

Please note: You must be set up and communicating on a network for the e-mail notiﬁcation to work.

Содержание CDVS-4100 Series




































































Результаты поиска

Содержание CDVS-4100 Series

Отзывы:

Crest Electronics CDVS-4100 Series, Руководство по установке и эксплуатации, Страница: 55 / 67

Результаты поиска

Содержание CDVS-4100 Series

Отзывы: