-
Page 7 -
door needs according to how many cycles it has been ran. Repeat the same thing for
submenu d05 which is the total operating time and perform the service required
according to the service manual.
6.
Perform the service and maintenance recommended by the service manual
7.
When the service is done it is time to reset the service counter “trip-meter”. Do this
according to §1.6.3 and §1.6.4. Remember that it is only possible to reset the “trip-
meter” and not the total counter or “Odometer”.
8.
Now one may change the service interval if there is a need for another interval than pre-
set cycles
*
(see also the service manual). This is done in submenu d07 and submenu
d08 and is explained in detail in §1.6.2
9.
The service is now ready and the door can be handed over to the customer again after
filling in the logbook.
* Factory setting number of days and / or cycles
for service indication:
CDM9 / CDM9 FD 365 days / 20.000 cycles
CDM10 HSD
365 days / 50.000 cycles
