-
Page 4 -
1:2 General
To enter the menu system, press the LEFT BUTTON (SW1). The main menu for the leveller
will be showed as [L].
Press the SW1 button. The main menu for the shelter will be showed as [S].
Press the SW1 button. The main menu for the door will be showed as [d].
Press the SW1 button. Exit the menu system and the state of the leveller, shelter or the door
will be showed again.
To enter one of the menus [L], [S] or [d], press the RIGHT BUTTON (SW2) and the submenu
will be entered.
The submenu for leveller are shown in
Table 2
for leveller.
The submenu for shelter are shown in
Table 3
for shelter.
The submenu for door are shown in
Table 1
for door.
- The LEFT BUTTON (SW1) is used to shift between the different settings in the submenus.
- The RIGHT BUTTON (SW2) is used to choose a setting in the submenu.
-The LEFT BUTTON (SW1) pressed in 2 seconds will exit a menu.
The information that is presented in some setting menus can also be changed with the LEFT
BUTTON (SW1).
Some other menus are though not changeable. An overview of which options that are
changeable is present in the column ”
Save
” in the table of menu choices on page 7.
The button SW1 works differently for different menu choices. The LEFT BUTTON (SW1) will in
some menus increase the value by 1. In other menus the value shown is set to 0 if you press
the LEFT BUTTON (SW1).
An overview of these choices can be seen in the column “
SW1
” in the tables with the menu
choices.
The LEFT BUTTON (SW1) has a repetitive function that helps the user to faster set the
desired value. If the button is pressed for a couple of seconds, the value shown in the display
will step by 10 values/second and with a further couple of seconds the display will step by 50
values/second. The RIGHT BUTTON (SW2) can be used to exit a setting menu.
To save in setting menu keep RIGHT BUTTON (SW2) pressed while pressing LEFT BUTTON
(SW1).
1:3 SERVICE TOOL BUTTONS
SW1 (LEFT BUTTON)
The button SW1 is used to activate menus and to step forward in the
menus and also to change the stored value that is shown in the
display. In the menu choices the SW1 is used to increase the shown
value by 1, to reset the value that is shown or to refresh the value
shown. The button is also used together with SW2 to store values back
to the internal memory (if the menu choice supports this- see below)
The button has a repetitive function if pressed more than 1,4 seconds.
SW2 (RIGHT BUTTON)
The button SW2 is used to choose menus, and to exit menus. It is also used together with SW1to store values.
SW2 button has no repetitive function.
SW1
SW2
1
2
