-
Page 9 -
D.
Press the LEFT BUTTON (SW1) to reset the operating time counter. The previous value shown
will now be set to zero (0)
E.
To leave the menu
without
saving
the new value press SW2. To leave the menu
and save
the
value, keep RIGHT BUTTON (SW2) pressed while pressing LEFT BUTTON (SW1).
F.
Press LEFT BUTTON (SW1) several times until the display shows [d], press one more time on
SW1 to exit from service menu.
Alternatively press LEFT BUTTON SW1 continuously for 2sec. to exit from service menu.
G.
The display now goes back to normal operation showing the state of the leveller, shelter or the
door.
1.6.4.
Reset the number of cycles counter
A.
The display shows the state of the leveller, shelter or the door.
B.
Press LEFT BUTTON SW1 3 times, menu [d] is showed. Select Door submenu by RIGHT
BUTTON SW2 d01 is showed.
C.
Press SW1 several times until submenu d04 is showed. Select the submenu by RIGHT BUTTON
SW2. The display now shows the number of cycles that is stored (for example “99”).
D.
Press the LEFT BUTTON (SW1) to reset the counter. The previous shown value will now be set
to zero (0).
E.
To leave the menu
without
saving
the new value press SW2. To leave the menu
and save
the
value, keep RIGHT BUTTON (SW2) pressed while pressing LEFT BUTTON (SW1).
F.
Press LEFT BUTTON (SW1) several times until the display shows [d], press one more time on
SW1 to exit from service menu.
Alternatively press LEFT BUTTON SW1 continuously for 2sec. to exit from service menu.
G.
The display now goes back to normal operation showing the state of the leveller, shelter or the
door.
1:7 Indication of errors
If an error on the door occurs, this is normally indicated by showing the error code on the
display. See the “Trouble shooting guide” for error codes explanation.
NOTE!
Different
guides for different types of operators!
