Cranesmart Systems LMI System, Руководство пользователя

Страница: 38 / 101

37 Cranesmart LMI Version R9
Battery Replacement for Anti-2-Block, Angle, Cable Reel & Level Transducers
The display panel will indicate a low battery for approximately three (3) weeks before the battery fails.
Before replacing the batteries call the service department at (888) 562-3222 or (780) 437-2986. Once you have verified
that it is a dead battery follow the steps below.
Please have the serial number of your system handy before calling for replacement batteries or to ask for
technical assistance. You can find the serial number on either the display panel or the load cell itself.
Tools and Equipment for battery replacement:
Battery replacement kit (Free from
Cranesmart™ Systems) contains:

One 3.6 volt Lithium Ion D-cell Battery

One 1/8th Allen key
NOTE:

We suggest you remove the transmitter from the boom of the crane; however, battery replacement can be done with the transmitter on the boom. If it
is raining or snowing remove the transmitter and perform the battery replacement indoors or undercover.

You may also buy a 3.6V Lithium battery from a local battery store. Ensure that you take the existing battery with you if possible for correct size
matching.
To Replace the Battery:
1. Remove the cap screw from the battery compartment lid and remove the lid.
2. Remove the battery from the holder and wait 30 seconds
– 1 minute before installing the new battery.
3. Insert the new battery according to the battery picture on the base of the battery clip.
4. Make sure that the o-ring is greased and has not been damaged because this will affect the seal.
5. Secure the lid.