Cranesmart Systems LMI System, Руководство пользователя

Страница: 21 / 101

20 Cranesmart LMI Version R9
Hydraulic Boom Linerider Installation Instructions
Important note: The linerider component should be
located on the top of the boom and as close to the
dead end section boom tip as possible
– see
illustration.
Installation steps
1. Affix the bolt at the tip of the base section (dead
section) of the hydraulic boom as illustrated to the
right. Select a location so that the swing arm angle
with respect to the boom will not exceed 30° during
normal operation of the crane. The linerider should be
located on the top of the boom and as close to the
dead end section boom tip as possible.
2. Attach the swing arm to the bolt.
3. Run the hoist line through the linerider as per
instructions on page 23 of this manual.
4. Check to ensure that the linerider has freedom of
movement from side to side.