Cranesmart Systems LMI System, Руководство пользователя

Страница: 40 / 101

39 Cranesmart LMI Version R9
3. Attach each of the corresponding tank tags to the correct location on the turret. Starting at the front (the center of the transducer when the
boom is pointing directly forward) and turning clockwise, the number on the tank tags should increase; the first tag will have the lowest
number.
4. Initially attach all tank tags with an adhesive tape (such as duct tape) until all positions are finalized.
5. Match each tank tag to the outside marks made in step 2.
6. Align each tank tag so that the wo
rd “TRANSDUCER” on the BDT label passes directly over it (see drawing). This is the tank tag reader
location on the BDT and for proper function all tank tags must pass through that area to be properly read.
7. Once a full test has been run, apply the supplied adhesive under all of the tank tags. Leave the tape on the tank tags until the adhesive is
dry and the tank tags do not move. It could take up to 2 days for the adhesive to dry depending on ambient temperature.
8. Using cable ties, secure the six-foot communication cable starting at the BDT and then move up toward the junction box making sure that it
cannot be pinched or snagged through full revolution of the turret.