Cranesmart Systems LMI System, Руководство пользователя

Страница: 32 / 101

31 Cranesmart LMI Version R9
Large Cable Reel Installation
The Large Cable Reel will arrive from the factory partially disassembled. The Drum will be packaged separate from the
Cable Reel body assembly and the Cable Reel Transducer will be mounted to a separate Transducer Extension Plate.
1. Use the supplied hardware to bolt the Transducer Extension
Plate with Transducer in place as shown in diagram.
2. Lift the Cable Reel assembly on to the mounting feet.
3. Using the supplied hardware bolt the Mounting Plate to the
mounting feet.
4. Attach the 4-pin connector to the Cable Reel Transducer Box.
5. Strain relief the signal cable to prevent it from being damaged.
6. Attach the Drum using the instructions below.
Cable Reel Drum Installation
Use the following instructions to install either the small or the large drum to the Cable Reel body assembly
1. With the label facing outwards lift the drum and place on the shaft.
The top of the shaft and the hole in the drum are D-shaped so they
can only be installed one way.
2. Install the drum-retaining washer and secure with bolt.
3. Apply a small amount of thread lock to the threads before tightening
the retaining bolt. This will prevent the bolt from backing off.