Cranesmart Systems LMI System, Руководство пользователя

Страница: 59 / 101

58 Cranesmart LMI Version R9
Menu Navigation
The
Cranesmart™ System uses a menu system to lead you through its functions. In normal operating mode the system
provides a general level menu of functions for which operators have permission. In supervisor mode the system
provides access to enable supervisors to configure a system to match their needs.
The
Cranesmart™ System displays the Configuration settings and then displays the Primary Operating screen on start-
up; press the Select button to enter the Secondary Operating screen to access the Navigation bar. From the Secondary
Operating screen users press the up or down arrows to select Setup to enter the menu system.
Secondary Operating Screen Navigation Bar
The Secondary Operating Screen has a navigation line on the bottom of the display to enable users to move through the
rest of the
Cranesmart™ system.
Exit Returns the user to the Primary Operating screen.
Limits Displays the Limit settings for the system, i.e. the Max or Min Angle or Max Load settings.
Tare Enables the operator to Tare out the current load value and return to the Primary Operating screen.
Sig Displays the signal strength for the transducers in the system and counts the packets of information being received.
Info Displays information about the system including; load chart, date and time, and operation time.
Setup Displays menu options to reconfigure system settings and diagnostic information.
Tare Out Function
The
Cranesmart™ system has a Tare function, which enables the operator to zero out the weight of the hook block or
headache ball and rigging. Once the tare function has been enabled only the weight below the hook will be displayed as
the actual weight on the Primary Display screen.
To Enable Tare Out:
1. From the Primary Operating screen press the Select button, the Secondary Operating screen is displayed.
2. Use the Up or Down arrows select Tare. This a
utomatically sends you to the Primary Operating screen and a “T” will be displayed at the end
of the bar graph.