manualshive.com logo in svg

Crane Merchandising Systems Genesis, Техническое руководство

Поделиться
Скачать
Crane Merchandising Systems Genesis Скачать руководство пользователя страница 93

4.

Switch on the power to the machine using the door switch safety key. Using the
service keypad located in the rear of the door, press the cup test switch (7) and
check that  a cup is ejected correctly. Repeat this test several times to confirm
that the mechanism is functioning correctly.

5.

Refit the transparent cup sleeves to the cup drop mechanism ensuring that the
flat on the turret motor lines up with the flat in the turret spigot moulding. Fill
the cup sleeves with cups. DO NOT touch cups with your hands.Allow the cups
to drop into the cup sleeves directly from the packaging.

6.

Rotate the cup turret assembly back into its operating position, ensuring that the
unit ‘locks’ into place. Remove the safety key and close the door.

Section 12 - Spare Parts

The following section details the spare parts that are available for the Genesis. Use of
these components when servicing or repairing the machine will significantly increase
the working life of the machine.

For all spare parts sales and enquiries:

Telephone: 01249 667321

Fax: 01249 461508

Email: [email protected]

91

Technical Manual

Содержание Genesis

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды