manualshive.com logo in svg

Crane Merchandising Systems Genesis, Техническое руководство

Поделиться
Скачать
Crane Merchandising Systems Genesis Скачать руководство пользователя страница 61

7.11  Coin and Card/Key Systems

The Genesis may be equipped with coin or card/key validation systems using either
Mars protocol ‘A’ or alternatively an MDB system.The coin or card/key system informs
the vending machine controller of the amount of credit which has been deposited into
the vending machine.

7.12  Change Giver

1.

The Change Giver communicates with the vending machine controller through a
serial communication interface. It will validate a coin and if accepted, send a signal
to the vending machine controller indicating the total amount of money which
has been tendered since the last vend.

2.

Once sufficient credit has been accumulated a vend will be permitted.The vending
machine controller will communicate to the change giver the actual price of the
drink dispensed. The change giver will return any change due to the customer,
provided the change tubes contain coinage above a pre-set level.

7.13  Coin Blocker

For Genesis machines fitted with a change-giver, a logic ‘low’ level from the vending
machine controller will disable any coin acceptance.

7.14  Card/Key System

1.

The card system fitted to the machine communicates with the vending machine
controller using the same principle as the change giver.

2.

The card system informs the vending machine controller of the amount of credit
on the customer's card. If there is sufficient credit for the selected drink, the
vending machine controller permits a vend and informs the card system of the
amount of credit to be taken from the card. The new balance will then be re-
written onto the customer's card.

N.B. For full information and programming instructions for all of these systems,
please refer to the user manual supplied with the validation system.

59

Technical Manual

Содержание Genesis

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды