Crane Merchandising Systems Genesis, Техническое руководство

Страница: 14 / 128

6. While the machine is powering up, the LCD will
display the message as shown opposite. As the
water heats, ensure that no water overflows
from the heater tank overflow pipe into the
waste tray. Check the system for leaks.
Important: Should the machine fail to fill correctly or leak, turn off the
stopcock and the power to the machine before investigating the fault.
7. Check the LCD display on the front of the machine to ensure that the water has
heated to the correct temperature and that the machine is in standby mode. A
machine set to free vend mode will alternate the messages:
N.B. Messages displayed in standby mode will change depending upon the
monetary device fitted and set up during programming.
8. Ensure that the cup drop mechanism operates correctly. Press the Cup Test
switch (7), located in the Service Keypad on the rear of the door (see page 49)
and ensure that a cup is ejected cleanly from the cup drop unit.
9. Freshbrew Models: Ensure the brewer guard and brewer waste container are
fitted correctly. Slide the container into position directly under the brewer with
its lip outside the brewer cover.
10. If fitted, check that the coin mechanism and cash box operate correctly. Fill the
coin tubes with correct coinage. Ensure coin return mechanism functions
correctly.
11. Operate the machine through its complete range of selections to ensure that each
vend is correctly dispensed. Follow the instructions detailed on page 48 for making
a vend using the Test Vend switch (6) located on the Service Keypad.
12. Remove the safety key and close the cabinet door. Ensure that the machine is left
in a clean and safe condition.
12
Technical Manual