Crane Merchandising Systems Genesis, Техническое руководство

Страница: 42 / 128

- 20 using the drink selection keypad.
2. Press the
↵ ↵
(Enter) key to save the new value and return to the System
Settings menu.Verify that the number is displayed in the status line at the bottom
of the display when Screen Contrast is highlighted.
5. Software Version: This menu displays the version number of the software installed
and is for information only. This information will be required should the engineer need
to phone the Crane Merchandising Systems helpdesk for advice.
4.8 Security Codes Menu
This menu allows the engineer to change both the operator and engineer program
entry codes for the machine. These factory default codes are 1-1-1-1 (engineers) and
2-2-2-2 (operators). If either code is changed ensure that the new code is recorded
and kept in a secure place.
To change either engineer or operator program entry codes, proceed as follows:
1. From the Main Menu screen press the down
(
▼
) key until Security Codes is highlighted
then press the
↵ ↵
(Enter) key to access the
menu screen. The LCD will display the screen
as shown.
2. To change the engineer entry code, press the
down (
▼
) key to highlight Engineer
Program then press the
↵ ↵
(Enter) key. The
LCD will display the Edit Pin screen as shown.
Enter a new pin number using the drink
selection keypad and press the
↵ ↵
(Enter) key.
N.B. This security number is not displayed. Be sure to record the new pin code
and keep it in a safe place.
3. Highlight Operators Program and follow the above procedure to change the
operator code. Ensure that all operators who use the machine are given the new
code.
40
Technical Manual