Crane Merchandising Systems Genesis, Техническое руководство

Страница: 89 / 128

Use the following steps as a guideline only and always refer to the instructions supplied
with the de-scaling agents regarding dosage and de-scaling time.
1. Switch off the machine and open the door. Remove all canisters and back covers.
2. Using the drain hose fitted to the tank, remove the bung and drain the water from
the heater into a suitable water tight container.
Safety First! Allow the water in the tank to cool before draining.
3. Once all of the water has drained from the tank, replace the bung into the drain
hose. Introduce the de-scaling solution in the recommended dosage into the
heater tank.
4. Switch on the machine and allow the heater tank to fill.
5. Turn off the machine and leave for approximately 40 minutes before draining the
tank again following the sequence described above.
6. Fit a new water filter and switch on the machine. Fill the tank and drain again
until all traces of the de-scaler are removed (at least 3 times).
7. Switch on the machine and allow the heater tank to fill and to heat up. Drain and
fill one more time.The machine is now ready to be put back in service.
11.3 Brewer Maintenance - Freshbrew Machines Only
Freshbrew machines are fitted with a dual brewer unit which produces freshbrew coffee
and tea beverages from the same unit. Routine cleaning and maintenance instructions
for this unit can be found in the Genesis Operators Manual - Part No. PR1035000.
1. Removing The Brewer
Periodically it may be necessary to remove the brewer from the machine.
1. Open the door and insert the safety key.The machine is now on.
2. Using the service keypad mounted inside the door (see page 45), press switch 2
(brewer open).The brewer will index to its fully open position and stop. Remove
the safety key to turn the power off. Remove the brewer guard to gain access to
the brewer unit.
3. Carefully remove both the coffee and tea water inlet pipes from the brewer.
Remove the dispense pipe from the tea brewer and dispense pipe complete with
87
Technical Manual