manualshive.com logo in svg

Crane Merchandising Systems Genesis, Техническое руководство

Поделиться
Скачать
Crane Merchandising Systems Genesis Скачать руководство пользователя страница 28

set at 2p but the lowest coin available from the coin mechanism is 5p, the machine
will not return the discount to the customer.

Highlight the Mug Discount sub menu from
within the Price menu. The LCD will display
the screen, with a current value in the status
line (e.g. 5p), as shown. Press the 

↵

↵

(Enter) key

to access the Mug Discount sub menu.

To enter a discount value, e.g. 10p, press the
sequence 0-0-0-1-0 using the appropriate
number keys on the drink selection keypad.The
LCD will change and display the screen as
shown. Press the 

↵

↵

(Enter) key to return to the

Price menu screen and verify that the new
price displays in the status line along the bottom of the display.

4.

View High/Low Price: This sub menu allows the engineer to view the highest
and lowest values in force, programmed via the Individual Prices sub menu.

N.B. If a single price is currently in force, this value will be displayed in both fields.

4.5 Product Configuration Menu

Entry into this menu allows the engineer to set heater tank temperature settings,
configure the selection timers for the drink
selections, disable drink selections and turn
SureVend™ On or Off.

Upon entry into the Product Configuration menu
the LCD will display the screen as shown.

1. Heater Tank  Set-Up: This sub menu allows the engineer to set values relating to
the maximum temperature that the water will be heated and maintained at and the
minimum temperature at which the machine will vend a drink.

1.

Heater  Tank Temperature:

From the

Product Configuration

menu, highlight

Heater Tank Set-Up and press the 

↵

↵

(Enter)

key. The  Heater Tank Temperature  menu  is
highlighted and displays the default temperature
- factory set to 90°C -  in the status line at the
bottom of the screen.

26

Technical Manual

Содержание Genesis

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды