Crane Merchandising Systems Genesis, Техническое руководство

Страница: 30 / 128

2. The following example describes how to adjust the Instant Tea recipe.With Instant
Tea highlighted as shown above, press the
↵ ↵
(Enter) key to access the Instant Tea
Timers menu. This menu, shown opposite,
contains the three ingredients which may be
involved in an Instant Tea selection plus an end
of vend delay time.
3. Press the
↵ ↵
(Enter) key to access the Instant Tea menu.The status line at the
bottom of the screen shows the current value of the highlighted timer. In the
example shown, the Hot Water value is configured to be on for 4 seconds.
The default Instant Tea timers are:
Hot Water
= 4.00 s
Ingredient 1 = 0.50 s
Ingredient 2 = 0.75 s
Ingredient 3 = 0.35 s
Product Delay = 1.00 s
N.B. Ingredient 1, 2 and 3 shown relate to default normal, strong and mild
timings.
4. To strengthen the flavour of the normal tea selection, lengthen the time of the
product throw. Press the (
▼
) key to highlight Ingredient -1. The status line at
the bottom of the screen will display the
current value, e.g. 0.50 s. Press the
↵ ↵
(Enter)
key to access the screen as shown. Enter a
value for a stronger normal selection, e.g. 0.60
s. Press the sequence 0-0-6-0 using the drink
selection keypad.
Press the
↵ ↵
(Enter) key to return to the Instant Tea menu and verify that the
new timing value is displayed at the bottom of the screen.
N.B. When in this screen with the ingredient highlighted, pressing the START key
will run the ingredient motor for the programmed time, allowing the engineer to
collect and weigh the ingredient to determine gram throw if required.
5. Adjust the other timers within the Instant Tea menu as desired. The Instant
Tea recipe also contains menus for Milk and Sugar timers. If necessary adjust
the timings for these ingredients. Once all timings have been entered and
verified, vend the selection to ensure that the new recipe is satisfactory and
that the cup does not under or over-fill.
28
Technical Manual