Crane Merchandising Systems Genesis, Техническое руководство

Страница: 23 / 128

3. Auger: This sub menu allows the engineer to test for correct operation of each
individual ingredient motor fitted to the machine. Press the
↵ ↵
(Enter) key to
display the test screen which indicates the number of motors fitted to the
machine.
N.B. Testing the ingredient motor causes the ingredient canister auger to turn.
Remove canisters before carrying out this test sequence. DO NOT place
ingredient canisters on the floor.
To test an ingredient motor, e.g. number 1,
press the corresponding button on the drink
selection keypad. The selection will be
highlighted as shown and the motor will
operate for a pre-determined time. Repeat this
operation to test additional ingredient motors.
Press the ‘X’ (Exit) key to return to the main test menu screen.
4. Whipper: This sub menu allows the engineer to test for correct operation of
each individual whipper assembly fitted to the machine. Press the
↵ ↵
(Enter) key
to display the test screen which indicates the number of whippers fitted to the
machine.
To test a whipper, e.g. number 2, press the
corresponding button on the drink selection
keypad. The selection will be highlighted as
shown and the whipper will run for a pre-
determined time. Repeat this operation to test
additional whipper units.
Press the ‘X’ (Exit) key to return to the main test menu screen.
5. Test Dispense Head: This sub menu allows the engineer to test the operation
of the dispense head mechanism.
Press the
↵ ↵
(Enter) key to display the test
screen followed by the START button on the
drink selection keypad. The dispense head
mechanism will move to its first dispense
position indicated by the screen opposite.
When the head reaches its first dispense position, it will stop and the LCD screen
will show the message Dispense Head Position - Extended. Press the START
21
Technical Manual