Crane Merchandising Systems Genesis, Техническое руководство

Страница: 24 / 128

key a second time to move the head to its second dispense position. Press the
START key again to move the head to its fully extended dispense position.
To return the dispense head to its “home”
position and complete the test, press the
START key. The dispense head mechanism will
return to its rest position as indicated by the
screen opposite.
When the head reaches its “home” position, it will stop and the LCD screen will
show the message Dispense Head Position - Idle indicating that the test has
been completed successfully.
Press the ‘X’ (Exit) key to return to the main test menu screen.
6. Switches & Sensors: This sub menu displays
the switches/sensors that can be tested. For
most of the items displayed the status line at
the bottom of the screen indicates the current
state of the highlighted sensor/switch. In the
example opposite, the status line indicates that
the Waste Tray Sensor is detecting that the
waste tray is empty.
N.B. The Brewer Switch menu will only be displayed on freshbrew models.
Press the up (
▲
) or down (
▼
) keys to highlight the other switch/sensor inputs
and view their status.
Mug Sensor - Current: This menu gives the engineer an indication as to the
efficiency of the SureVend™ sensor.
Highlight Mug Sensor - Current from the
Switches & Sensors menu and press the
↵ ↵
(Enter) key. The LCD will display the screen as
shown opposite. The numerical value shown
indicates the current mug sensor value.
The Mug Sensor value can be any number
between 0 and 255 and represents the most recent value read from the sensor.
The engineer can test the mug sensor by blocking the SureVend™ sensors
located in the drink dispense area. The value displayed in the status line should
drop as the sensors are blocked.The lower the number indicated the greater the
sensor blockage.
22
Technical Manual