COSMOGAS MYDENS, Инструкция по установке, эксплуатации и обслуживанию

Страница: 55 / 76

55 MYDENS
COSMOGAS
Figure 8.1 - removing the casing and opening of command board
8.2 - Removing the casing and
access to internal components
Proceed as follows to remove the casing (refer to figure
8.1):
1.- pull the lower cover “A” towards the front for approx.
10mm
2.- push the lower cover “A” downwards;
3.- loosen the screws “H”;
4.- pull the lower part of the front-piece “B” towards the front
and then slide it out upwards until it is released from the
guides “C”;
To access the command and control board:
1.- turn the command board “D” towards the front;
2.- open the commands board “D” by operating on closure
“G”;
To access the electric connections board:
1.- turn the command board “D” towards the front;
2.- slide lid “E” out by operating on the “F” closing flaps;
C
E
D
G
H
F
A
B
020002.01.018
8 - MAINTENANCE