CORVUS TERRAIN DX4 PRO, Руководство пользователя

Страница: 61 / 80

61 We reserve the right to modify the product and the design.
USER
MANUAL
brake wear brake fluid
If the thickness of any of the front or rear disc brake pads is less than 1.5
mm, completely change the set of affected pads.
Check that the thickness of the front and
Rear discs is at least 3.5 mm.
We recommend that you go to your CORVUS dealer to change the
brake pads. They will also check for any possible wear of the brake
discs.
Inspect the brake fluid and change it regularly.
You must also change it if is contaminated by water or dirt.
Recommended fluid: DOT-4 brake fluid.
Do not mix different types of brake fluid. The fluid used to fill or re-
new your circuit must correspond to the specified standard in the
fluid reservoir of each circuit. You should never change the specifi-
cation, always respect the dot-4 specification. What is important is
not that the brake fluid should be the same brand, rather that it must
have the same specification. Never use fluid from a container that
is not sealed (unopened) at source. Never use brake fluid that has
already been used.
The brake fluid level must be within the indicated MIN / MAX range (1). If
there is not enough liquid, it should be added.
Do not spill brake fluid on paintwork.
Check that there is no
loss of liquid through
the gaskets. Check for
possible damage to the
brake sleeves.
It is recommended that
you replace the brake
fluid every 2 years.
MAX
MIN
1