background image

73

We reserve the right to modify the product and the design.

USER

MANUAL

PRELIMINARY WARNINGS

VARIOUS

A. Were the repair of the defect or the replacement of the part to be disproportionate, 

CORVUS

 will have the prerogative to decide at its sole discretion 

whether to repair or replace defective parts. Ownership of the replacement parts or the replaced parts, as the case may be, shall correspond to 

CORVUS

 

without any other consideration. The official 

CORVUS

 distributor or authorized dealer to whom the repair of such defects has been entrusted will not be 

authorized to make binding declarations on behalf of 

CORVUS

.

B. In the case of doubt as to the existence of a defect or if a visual or material inspection is required, 

CORVUS

 reserves the right to demand the return of 

parts covered by a warranty claim or to request a review of the defect by a 

CORVUS

 expert. Any additional warranty obligations on parts replaced without 

charge or for any service provided free of charge under this warranty will be excluded. The warranty for spare parts within the warranty term will end on the 

date of expiry of the warranty term of the product concerned.

C. If it were to prove impossible to repair a defect and the replacement thereof were to be disproportionate for the manufacturer, the consumer is guaranteed 

the right to cancel the contract (payment of compensation) or to a partial refund of the purchase price (discount), instead of the repair of the vehicle.

D. Warranty claims made by the buyer under the sale and purchase agreement entered into with the corresponding official distributor or authorized dealer 

will not be affected by this warranty. This warranty will not affect the additional contractual rights of the buyer under the general conditions of business of 

the authorized dealer. Such additional rights, however, can only be claimed from the official distributor or authorized dealer.

E. If the buyer were to resell the product within the warranty period, the terms and conditions of this warranty will continue to exist with the current scope, 

so that the rights to file a claim under this warranty in accordance with the terms and conditions covered by this document will be transferred to the new 

owner of the vehicle.

Содержание TERRAIN DX4 PRO

















































































Отзывы: