CORVUS TERRAIN DX4 PRO Скачать руководство пользователя страница 27

Страница: 27 / 80

*: According to version.

We reserve the right to modify the product and the design.

USER

MANUAL

MULTIFUNCTION PANEL

WARNING INDICATORS

Oil pressure

Warning indicator to show the correct oil pressure in the engine.

The warning indicator will illuminate for a few seconds when you

switch on the vehicle using the ignition key.

Once the vehicle has started up, it will turn off.

More information in the maintenance section of this manual.

If the warning indicator illuminates when the engine has started

or when you are driving, you must turn off the engine and contact

your nearest CORVUS garage.

Parking brake and brake fluid level malfunction

Warning indicator to indicate that;

- The parking brake is activated;

- The driver is not seated in the seat;

- Or there is a malfunction in the braking system or a lack of brake

fluid. If so, park the vehicle and contact

your nearest CORVUS garage.

The warning indicator will illuminate for a few seconds when you

switch on the vehicle using the ignition key.

More information in the maintenance section of this manual.

Engine coolant temperature

Warning indicator to indicate the correct temperature of the

coolant in the radiator.

The warning indicator will illuminate for a few seconds when you

switch on the vehicle using the ignition key.

More information in the maintenance section of this manual.

If the warning indicator illuminates when the engine has started

or when you are driving, you must turn off the engine and contact

your nearest CORVUS garage.

Battery level

Warning indicator to indicate the battery is charging correctly.

The warning indicator will illuminate for a few seconds when you

switch on the vehicle using the ignition key. More information in

the maintenance section of this manual. If the warning indicator

illuminates when the engine has started or when you are driving,

you must turn off the engine and contact your nearest CORVUS

garage.

Steering indicators

Warning indicator will illuminate when you use the lever or the

emergency button to indicate a change of direction.

Diesel heaters

Warning indicator to indicate that the combustion chamber is

warming up to make it easier to start the engine. Start the engine

when the warning indicator has turned off. The warning indicator

will illuminate for a few seconds when you switch on the vehicle

using the ignition key. If the warning indicator illuminates when

the engine has started or when you are driving, you must turn off

the engine and contact your nearest CORVUS garage.

Long-range lights

Warning indicator to indicate that the long-range lights are

switched on to enable greater visibility.

Change to low beam when vehicles or people are in front of you.

Fuel level

Fuel tank capacity of 40 L. of diesel fuel, type B7 / B10.

The warning indicator will illuminate when there are 5 litres of fuel

left.

Содержание TERRAIN DX4 PRO

















































































Результаты поиска

Содержание TERRAIN DX4 PRO

Отзывы:

Похожие инструкции для TERRAIN DX4 PRO

Бренды по названию

Популярные бренды

CORVUS TERRAIN DX4 PRO, Руководство пользователя

Результаты поиска

Содержание TERRAIN DX4 PRO

Отзывы:

Похожие инструкции для TERRAIN DX4 PRO

Бренды по названию

Популярные бренды