CORVUS TERRAIN DX4 PRO Скачать руководство пользователя страница 35

Страница: 35 / 80

We reserve the right to modify the product and the design.

USER

MANUAL

DAILY INSPECTION BEFORE DRIVING

Do the brake discs look okay?

Any important scratches, cracks, excessive wear, etc. can be easily spotted.

Check that the thickness of the discs is at least 3.5 Mm at the front

and 3.5 Mm at the rear.

Go immediately to your corvus dealer if you don’t know what to do

in each case. This can affect your safety. You should not drive the

vehicle.

Are the front and rear brake pads in good condition?

Check the thickness of the remaining lining, ensuring that the thickness of

the lining is not less than 1.5 mm. If it is, contact your CORVUS dealer to

replace them.

NEVER drive with worn brake pads. Pads in this state lose efficiency

and may suppose a serious risk for your safety.

Please attend your CORVUS service to change brake pads

immediately.

Check that all controls feel the same to you.

The brake pedal, accelerator pedal, gearshift lever, 2WD/4WD transmission

switch, hand brake lever, light panel, start-up system, horn and indicators.

All these commands and control elements have their own characteristic

functioning and touch, any change indicates an abnormality or damage.

Nobody knows your vehicle better than you do, if you notice any changes,

go immediately to your CORVUS dealer.

Содержание TERRAIN DX4 PRO

















































































Результаты поиска

Содержание TERRAIN DX4 PRO

Отзывы:

Похожие инструкции для TERRAIN DX4 PRO

Бренды по названию

Популярные бренды

CORVUS TERRAIN DX4 PRO, Руководство пользователя

Результаты поиска

Содержание TERRAIN DX4 PRO

Отзывы:

Похожие инструкции для TERRAIN DX4 PRO

Бренды по названию

Популярные бренды