CORVUS TERRAIN DX4 PRO Скачать руководство пользователя страница 38

Страница: 38 / 80

*: According to version.

We reserve the right to modify the product and the design.

USER

MANUAL

start-up process

USE OF THE REAR DIFFERENTIAL LOCK AND UNLOCK

begin driving

with your CORVUS, follow these steps:

1. Step on the brake pedal, without stepping on the accelerator.

2. Put the gearshift lever in L, H or R, and choose the direction of travel.

3. Release the parking brake. Make sure that is completely disconnected.

4. Accelerate gently in the selected gear. When accelerating the vehicle, it is

possible that on occasions it may not move and it may make a small metallic

noise. This is due to the fact that the gear has not been fully engaged; in this

case, stop accelerating and wait for the engine to return to idling speed,

push the shift lever to select the gear ratio you want and accelerate gently

at the same time, you will notice a “click” on the shift lever which confirms

that the gear has been fully engaged. You can now release the gearshift

lever and start moving.

It is recommended to activate the rear differential lock with vehicle

completely stopped to minimise worn in the components.

NEVER be used in roads.

Failure to comply with this instruction can cause severe damage to

the engine.

lock the rear differential

perform the following steps:

1. Step on the brake pedal, without stepping on the accelerator.

2. Disconnect the hand brake. Make sure that is completely disconnected.

3. Put the gearshift lever into NEUTRAL (N) - central position.

unlock the rear differential

perform the following steps:

1. With the vehicle completely stopped, step on the brake pedal,

without stepping on the accelerator.

2. Put the gearshift lever into NEUTRAL (N) - central position.

Содержание TERRAIN DX4 PRO

















































































Результаты поиска

Содержание TERRAIN DX4 PRO

Отзывы:

Похожие инструкции для TERRAIN DX4 PRO

Бренды по названию

Популярные бренды

CORVUS TERRAIN DX4 PRO, Руководство пользователя

Результаты поиска

Содержание TERRAIN DX4 PRO

Отзывы:

Похожие инструкции для TERRAIN DX4 PRO

Бренды по названию

Популярные бренды