CORVUS TERRAIN DX4 PRO, Руководство пользователя

Страница: 54 / 80

54 We reserve the right to modify the product and the design.
USER
MANUAL
4X4 LOCKING SYSTEM OIL
CHECK:
To check the 4X4 locking system oil level, you have to drain the oil into a
calibrated container and measure the amount that has been extracted. The
correct volume is 0.05 L.
CHANGE:
It is convenient to frequently check that there are no leaks and the
maintenance of the oil level, for correct operation.
Changing the locking system oil.
1. Put the vehicle in the horizontal position and remove the front underbody
protector (p. 47).
2. Place a container under the 4x4 locking system to collect the used oil
and avoid any spillage.
3. Remove the filler plug (1), to facilitate a better drainage of the 4x4 oil.
4. Remove the drain screw (2) the 4x4 locking system oil.
5. Once all the oil has drained out, replace the washer and make sure the
drain screw is tightened at 24 Nm.
6. Fill with 0.05 L of new oil.
7. Replace the plug washer and tighten the oil filler plug (1) at 24 Nm.
TECHNICAL INFORMATION:
Recommended oil: SAE 80W-90, API GL5
Capacity: 0.05 L
Tighten the filler plug/screw to 24 Nm.
Tighten the drain plug/screw to 24 Nm.
NEVER drive the vehicle with no oil in the 4X4 locking system or with
a low oil level.
It is important to be aware of the maintenance periods of the
components shown in the maintenance table.
1
2