CORVUS TERRAIN DX4 PRO Скачать руководство пользователя страница 22

Страница: 22 / 80

We reserve the right to modify the product and the design.

USER

MANUAL

LOCATION OF COMPONENTS

TRAILER

The vehicle has a tow ball, located at the rear of the vehicle. It is important

to know its load limitations. For this purpose there is an homologation plate

that indicates the following information.

Do not exceed 16km/h when towing a load nor drive the vehicle with

the short gear (L) engaged.

Do not drive on sloped or dangerous grounds when towing loads. If

dirving on diffult grounds is needed, reduce the speed significantly

and constantly pay attention to elements that can be potentially

dangerous for your safety.

When parking the vehicle with a trailer, it is important to do it on an

horizontal surface. Do not park in slopes nor leave te vehicle with an

engaged gear, as it will not prevent the vehicle from moving. Always

use the parking brake.

In order to improve vehicle stability and to reduce the effects of

towing a load, it is convenient to distribute the load weight between

cargo box and trailer if possible.

Secure the load to the trailer correctly and make sure the space

between the trailer and the vehicle is free from any elements that

could damage any of them or affect driving.

In the upper part of the towing ball it can be found the 7-pin socket

connector for towing. This socket has a maximum power of 150W,

exceeding this power may result in serious damage in the electric

system and must not be exceeded under any circumstance. This

power will be reduced if there is something connected to any of the

vehicle’s auxiliary power points.

The vehicle can only tow more than 450kg if the trailer is equipped

with an inertia brake. Always without exceeding the maximum load

supported by the vehicle.

Do not pull or tow objects from any other point on the vehicle than

the winch (if available) or from the hitchs provided (one rear with tow

ball and one front).

Never drive with passengers in the trailer.

The vehicle should be driven avoiding sharp turns or aggressive

driving. Accelerate progressively and keep in mind that the braking

distance will be affected by the trailer load.

Maximum towing capacity for a trailer WITH inertia

brake

Maximum towing capacity for a trailer WITHOUT inertia

brake

Maximum vertical towball load

907 kg

450 kg

240 kg

MODELO: CORVUS TERRAIN

Содержание TERRAIN DX4 PRO

















































































Результаты поиска

Содержание TERRAIN DX4 PRO

Отзывы:

Похожие инструкции для TERRAIN DX4 PRO

Бренды по названию

Популярные бренды

CORVUS TERRAIN DX4 PRO, Руководство пользователя

Результаты поиска

Содержание TERRAIN DX4 PRO

Отзывы:

Похожие инструкции для TERRAIN DX4 PRO

Бренды по названию

Популярные бренды