CORVUS TERRAIN DX4 PRO Скачать руководство пользователя страница 43

Страница: 43 / 80

We reserve the right to modify the product and the design.

USER

MANUAL

- Were it to be necessary to keep the engine running to carry out a

service on the vehicle, make sure that the work environment is well

ventilated, and if necessary use adequate air extractors; NEVER run

an engine in closed premises. The exhaust gases that are produced

are toxic.

- The battery electrolyte contains sulphuric acid. Protect your

eyes, clothing and skin. Sulphuric acid is highly corrosive; in case

of contact with eyes or skin, wash with plenty of water and go to a

doctor immediately.

- Batteries produce hydrogen, a gas that can be highly explosive.

Do not smoke and avoid open flames or sparks near the battery,

especially when you are charging it.

- Fuel is extremely flammable and can explode under certain

conditions. Do not smoke and do not allow any open flames or sparks

in the work area.

- Clean the brake pads in a ventilated place, directing the jet of

compressed air in such a way that you do not breathe in the dust

produced by the wear and tear of the friction material. Although such

dust does not contain asbestos, inhalation is nevertheless harmful.

- Use original CORVUS spare parts and lubricants recommended by

CORVUS. Non-original or non-compliant spare parts can damage the

vehicle.

- Only use tools designed specifically for this vehicle.

- Always use new gaskets, sealing rings and pins during assembly.

- After disassembly, clean the components with non-flammable

solvent or one with a low flammability point.

Lubricate all working surfaces before assembly, excluding the

conical couplings.

- After assembly, check that all components have been installed

correctly and that they work perfectly.

- For disassembly, inspection and assembly operations, only use tools

with metric measurements. Metric screws, nuts and bolts are not

interchangeable with connecting parts with English measurements.

The use of unsuitable tools and connecting parts may damage your

vehicle.

SAFETY AND MAINTENANCE STANDARDS

Содержание TERRAIN DX4 PRO

















































































Результаты поиска

Содержание TERRAIN DX4 PRO

Отзывы:

Похожие инструкции для TERRAIN DX4 PRO

Бренды по названию

Популярные бренды

CORVUS TERRAIN DX4 PRO, Руководство пользователя

Результаты поиска

Содержание TERRAIN DX4 PRO

Отзывы:

Похожие инструкции для TERRAIN DX4 PRO

Бренды по названию

Популярные бренды