CORVUS TERRAIN DX4 PRO, Руководство пользователя, Страница: 52 / 80

52 We reserve the right to modify the product and the design.
USER
MANUAL
transmission oil (level check) transmission oil (change)
The smooth operation and durability of the transmission essentially depend
on the oil being kept at the optimum level and being changed periodically,
as indicated in the Maintenance Table (p. 44/45).
Checking the oil level:
1. Put the vehicle in a horizontal position.
2. Run the engine for a few minutes and turn it off.
3. Remove the level screw (1).
4. If a slight amount of oil oozes from the hole, the level will be correct. If,
on the contrary, no liquid oozes from the hole, you should continue to add
more oil.
5. If you need to add more oil, you must do so through the filler cap (2).
Changing the transmission oil:
1. Put the vehicle in horizontal position and lift the load box.
2. Remove the rear protector (p. 47).
3. Place a container under the transmission to collect the used oil and avoid
any spillage.
4. Remove the filler plug (1), to facilitate a better drainage of the
transmission oil.
5. Remove the transmission oil drain screw (2).
6. Once all the oil has drained from the transmission, replace the washer
and make sure the drain screw is tightened to 24 Nm.
7. Fill the transmission with new oil.
8. Attach the filler cap (2).
TECHNICAL INFORMATION:
Recomended oil: SAE 80W-90, API GL5.
Capacity: 1,7 L.
NEVER drive the vehicle with no oil in the gearbox or with low oil
level. It is important to be aware of maintenance periods of the
components shown in the maintenance table.
1
2
1
2