90
If you are experiencing corrupted files when you download a file with your FTP client, try
using another FTP program.
If all else fails in the installation, what can I do?
Reset the Router by holding down the reset button until the Power LED fully turns on
and off (Press the button
no
longer than 5 sec). Reset your cable or DSL modem by
powering the unit off and then on. Obtain and flash the latest firmware release that is
readily available on the Corinex website,
www.corinex.com
.
How will I be notified of new Router firmware upgrades?
All Corinex firmware upgrades are posted on the Corinex website at www.corinex.com,
where they can be downloaded for free. To upgrade the Router’s firmware, use the
Firmware tab of the Router’s web-based utility. If the Router’s Internet connection is
working well, there is no need to download a newer firmware version, unless that version
contains new features that you would like to use. Downloading a more current version of
Router firmware will not enhance the quality or speed of your Internet connection, and
may disrupt your current connection stability.
Will the Router function in a Macintosh environment?
Yes, but the Router’s setup pages are accessible only through Internet Explorer 4.0 or
Netscape Navigator 4.0 or higher for Macintosh.
I am not able to get the web configuration screen for the Router. What can I do?
You may have to remove the proxy settings on your Internet browser, e.g., Netscape
Navigator or Internet Explorer. Or remove the dial-up settings on your browser. Check
with your browser documentation, and make sure that your browser is set to connect
directly and that any dial-up is disabled. For Internet Explorer, click Tools, Internet
Options, and then the Connection tab. Make sure that Internet Explorer is set to Never
dial a connection. For Netscape Navigator, click Edit, Preferences, Advanced, and
Proxy. Make sure that Netscape Navigator is set to Direct connection to the Internet.
Is the Router cross-platform compatible?
Any platform that supports Ethernet and TCP/IP is compatible with the Router.
Does the Router pass PPTP packets or actively route PPTP sessions?
The Router allows PPTP packets to pass through.
What are the advanced features of the Router?
The Router’s advanced features include Advanced Wireless settings, Filters, Port
Forwarding, Routing and DDNS
Can the Router act as my DHCP server?
Yes. The Router has DHCP server software built-in.
Can I run an application from a remote computer over the wireless network?
This will depend on whether or not the application is designed to be used over a
network. Consult the application’s documentation to determine if it supports operation
over a network.
What is the IEEE 802.11g standard?
It is one of the IEEE standards for wireless networks. The 802.11g standard allows
wireless networking hardware from different manufacturers to communicate, provided
that the hardware complies with the 802.11g standard. The 802.11g standard states a
maximum data transfer rate of 54Mbps and an operating frequency of 2.4GHz.
What IEEE 802.11b features are supported?
The product supports the following IEEE 802.11b functions:
• CSMA/CA plus Acknowledge protocol
