113
2. When the IP Configuration window appears, select the Wireless or Ethernet
adapter you are using to connect to the
Corinex Wireless to Powerline Router G
via a Ethernet, Wireless or through the Powerline, as shown in Fig. 12.1.
3. Write down the
Adapter Address
as shown on your computer screen (see Figure
7.1). This is the MAC address for your Wireless or Ethernet adapter and will be
shown as a series of numbers and letters. The MAC address/Adapter Address is
what you will use for MAC Address Cloning or MAC Filtering.
This example shows the IP address of your Wireless adapter as 10.101.2.38. Your
computer may show something different.
E.2 For Windows NT, 2000, and XP:
The following steps show an alternative way of obtaining the MAC and IP address for
your Wireless or Ethernet adapter.
1. Click
Start
and
Run
. In the
Open
field, enter
cmd
. Press
Enter
key or click the
OK
button.
Fig. 11.2 Running ipconfig
2. In the command prompt, enter
ipconfig /all
. Then press
Enter
key.
3. Write down the
Physical Address
as shown on your computer screen (Figure
11.2); it is the MAC address for your Wireless or Ethernet adapter. This will
appear as a series of letters and numbers. The MAC address/Physical Address is
what you will use for MAC Address Cloning or MAC Filtering.
