46
In this screen you can change the WAN settings of your network.
You can select the
Connection
type. You can use the Default Connection type or you
can create the new connection by clicking on the
New
button. You are also able to
delete some type of connections by selecting the connection which you want to remove
by pressing the
Delete
button. You can also enter a short description of the connection
in the Description field. Then select the
Interface
type from the drop down menu and
choose the type of protocol that you want to use for WAN connection.
The
Corinex Wireless to Powerline Router G
supports four WAN connection types:
DHCP
(Obtain IP address dynamically),
Static
,
PPPoE
, and
PPTP
. The setup will differ
according to the type of your Internet connection. You can select a
Protocol
type from
the drop down menu from
DHCP
,
Static
,
PPPoE
,
PPTP
, and
Disabled
. You can also
select the
Primary
connection type.
Follow the instructions for your connection type below.
DHCP
•
Select
DHCP
from the
Protocol
drop down menu.
•
If your ISP gave you the Host Name, enter it into the
Host Name
field.
•
Some ISPs require you to change your Routers MAC address into your previously
connected Ethernet card. Click on
MAC Address
field and change it.
•
Click
on
Apply
button.