Corinex Wireless to Powerline Router G Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 117

Corinex Wireless to Powerline Router G Скачать руководство пользователя страница 6

6

4. Disclaimer of Warranty. The Software is provided “AS IS“ without warranty of any
kind. CORINEX and its suppliers disclaim and make no express or implied warranties
and specifically disclaim warranties of merchantability, fitness for a particular purpose
and non-infringement of third-party rights. The entire risk as to the quality and
performance of the Software is with you. Neither CORINEX nor its suppliers warrant that
the functions contained in the Software will meet your requirements or that the operation
of the Software will be uninterrupted or error-free.

5. Limitation of Liability. Corinex’s entire liability and your exclusive remedy under this
EULA shall not exceed the price paid for the Software, if any. In no event shall
CORINEX or its suppliers be liable to you for any consequential, special, incidental or
indirect damages of any kind arising out of the use or inability to use the software, even
if CORINEX or its supplier has been advised of the possibility of such damages, or any
claim by a third party.

6. Applicable Laws. This EULA will be governed by the laws of Canada, excluding its
conflict of law provisions.

7. Export Laws. This EULA involves products and/or technical data that may be
controlled under any applicable export control laws, and regulation, and may be subject
to any approval required under such laws and regulations.

8. Precedence. Except as set out above, where separate terms are provided by the
software supplier, then, subject to this EULA, those terms also apply and prevail, to the
extent of any inconsistency with this EULA.

«
...
4
5
6
7
8
...
»

Содержание Wireless to Powerline Router G






















































































































Отзывы:

Нет отзывов