48
•
Click
on
Apply
button.
PPTP
•
Select
PPTP
type of connection
from the
Protocol
drop down menu.
•
Enter the IP address to the
PPTP Gateway Address,
set the
PPTP Username,
and
PPTP Password
for authentication.
•
Determine whether the PPTP link should be automatically disconnected if no
traffic has been observed for the period by
PPTP Max Idle Time
or not.
•
In
the
PPTP Max Idle Time
input field, set the number of seconds to wait before
disconnection the PPTP link if
PPTP Connect
on Demand is
Enabled
.
•
In
the
PPTP Keep Alive
drop down menu you can set whether the PPTP link
should be automatically restored if it is lost. This setting has no effect if
PPTP
Connect on Demand
is
Enabled
.
•
If
the
PPTP Connect on Demand
is
Enabled
, you can set the number of
seconds to wait before disconnecting the PPTP link in the
PPTP Redial Period
input field.
•
In
the
PPTP MRU
input field, set the maximum number of bytes that the PPTP
interface will receive in a single Ethernet frame.
•
In
the
PPTP MTU
input field, set the maximum number of bytes that the PPTP
interface will transmit in a single Ethernet frame.
